Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Washington?
Spring replacement in Washington, DC typically costs $210 – $400 for one torsion spring, and a matched pair usually runs about twice that because the two springs are replaced together. That estimate covers the spring, the labor to wind and balance it, and a safety check of the cables, drums and door travel. The written estimate sets the final price, and Stratford Garage Door Service offers free estimates so you know the number before any work starts.
Call (844) 372-0752 to get yours scheduled. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- One spring: $210 – $400. A matched pair: roughly double that, since both are replaced at once.
- A broken spring is a safety part, not a repair to attempt yourself. Winding torsion springs takes the right tools and training.
- Age of the door, spring type (torsion vs. extension), and whether cables or drums show wear all move the price.
- We work on every major brand already in DC garages, including Clopay, Amarr, Wayne Dalton and Raynor doors riding on LiftMaster, Chamberlain, Genie and Craftsman openers.
- Free estimates, upfront pricing, and a repair-first mindset. We quote the fix your door needs, not a replacement.
Spring Replacement Cost Breakdown (2026)
Here’s how spring work breaks down in the Washington market. These are typical estimated ranges; your written estimate confirms the exact number for your door.
| Line Item | Typical Estimated Range |
|---|---|
| Single torsion spring replacement | $210 – $400 |
| Matched pair (replaced together) | About twice the single-spring range |
| Cable repair (often paired with spring work) | $155 – $295 |
| Track realignment | $140 – $285 |
| Roller replacement | $130 – $260 |
| Panel replacement (if a spring failure damaged a section) | $295 – $590 |
| Full garage door repair (broader jobs) | $175 – $710 |
| Opener repair (if the opener was strained by the failure) | $140 – $380 |
What pushes a spring job toward the top of the range? Heavier doors, high-cycle springs rated for more open-and-close cycles, and a matched pair done at once. What keeps it lower? A standard-weight single spring on a door where the cables, drums and bearings are still in good shape. When a spring breaks, it’s common for a cable to fray or a drum to slip at the same moment, which is why the estimate often includes a cable line item alongside the spring. We check the whole system before quoting so there are no surprises once the door is open on the truck.
If your opener has been straining against a heavy door with a tired spring, that’s worth a look too. Opener repair in Washington runs $140 – $380, and opener installation, if the motor is genuinely past saving, runs $295 – $650. We won’t push a new opener when a repair keeps the one you own working.
What Affects Spring Replacement Pricing in Washington
No two DC garages are the same, and the price reflects what’s actually on your door. These are the factors that move the number most.
- Spring type. Torsion springs mounted on a shaft above the door are the standard in most DC homes and cost more to replace than extension springs that stretch along the sides. Both are common here, and both are quoted as one spring or a matched pair.
- Single vs. pair. A matched pair is usually replaced together because when one spring breaks, its partner has taken the same wear and typically fails soon after. That’s why a pair costs about twice a single spring.
- Door weight and material. A heavy wood or insulated steel door loads the spring harder than a basic single-layer steel door, so it needs a stronger spring. Older homes in neighborhoods like Capitol Hill and Georgetown often have heavier original doors that call for a higher-cycle spring.
- Condition of cables, drums and bearings. A spring doesn’t fail in isolation. Frayed cables or a worn bearing plate add line items in the $155 – $295 cable range or the $130 – $260 roller range.
- Access and ceiling height. A tight garage with low clearance or a low-pitch ceiling takes longer to work in safely, and that time is part of the quote.
- Brand and parts availability. If your door is a Clopay, Amarr, Wayne Dalton or Raynor, the spring is sized to that door’s specific weight and lift. We know these brands and their spring specs, so the right part is on the truck instead of being ordered twice.
One more local note: DC’s humid summers and cold winters work a spring through real temperature swings, and a door that gets used several times a day wears its spring faster than one opened once in the morning. That cycle count, not just calendar age, is what a technician reads when sizing a replacement.
How to Save on Spring Replacement
A spring is a fixed safety part, so there’s no bargain version worth installing. But there are honest ways to keep the total down.
- Replace the pair, not the survivor. Doing both springs at once costs about twice a single spring but saves you a second service visit, and the second spring was going to fail anyway. It’s the cheaper path over a year.
- Fix the small stuff in the same visit. If a roller is squealing or a track is out of line, adding it to the spring job costs less than a separate trip. Rollers run $130 – $260 and track realignment $140 – $285.
- Get the free estimate first. We quote before we touch the door, and the written estimate sets the final price. Call (844) 372-0752 and we’ll tell you what your door actually needs.
- Don’t run the opener on a broken spring. Every cycle with a snapped spring strains the motor and cables, and that turns a spring job into a spring-plus-opener job.
We’re a garage door specialist, not a general handyman, so the diagnosis is fast and the recommendation is based on the door and opener you already own. We’re fluent in LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor – so we already know your brand before we arrive.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in Washington, DC?
Expect $210 – $400 for one torsion spring, and roughly twice that for a matched pair, which is what most jobs call for. A cable that needs replacing alongside the spring adds $155 – $295. Call (844) 372-0752 for a free estimate – the written quote is the final price.
Is it cheaper to repair or replace a broken spring?
Repair is almost always the answer: replacing the spring is the cheapest fix, and a full door replacement only makes sense when the door itself is failing. New door installation runs $825 – $2595, far more than a spring job. We take a repair-first approach and only recommend a new door when the existing one is genuinely past saving. Call (844) 372-0752 for an honest look at yours.
Can you come today if my spring broke?
Same-day service is often possible, since a broken spring leaves a door stuck and we treat it as a priority. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and same-day work is priced the same as any other spring job – the written estimate sets the price. Call (844) 372-0752 and we’ll find the next opening.
How long does a spring replacement take?
A single spring or a matched pair is typically a same-visit job, usually an hour or two depending on the door and condition of the cables. Because we work only on garage doors and already know the major brands, there’s no second trip for parts. Call (844) 372-0752 to book an estimate.
Why does a spring pair cost twice a single spring?
Because a pair means two springs, each in the $210 – $400 range, and both are replaced together when the door carries two. The two springs balance the door and wear evenly, so replacing one alone leaves the other close to failing. Our written estimate shows the pair spelled out so you see exactly what’s involved. Call (844) 372-0752 to get yours – estimates are free.
Book Your Spring Replacement in Washington
A snapped spring means a door you can’t safely lift, and winding a torsion spring takes the right tools and the training to do it without injury. That’s a job for a trained technician, not a weekend project. Stratford Garage Door Service has been working on residential garage doors in Washington since 2015 – it’s the only thing we do, and we do it completely. From the spring to the opener, Clopay and Amarr doors to LiftMaster and Chamberlain openers, we handle the whole system. Whether you’re in Capitol Hill, Georgetown or anywhere in the city, give us a call for a free estimate at (844) 372-0752. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You can also learn more about Stratford Garage Door Service and the Washington area we serve.
Pricing reflects the Washington market as of 2026. Stratford Garage Door Service offers free estimates – call (844) 372-0752.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Dustin Quinn"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty with the right spring on the truck. Door's quieter now than it was before it broke."
- Darnell Whitfield"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Tiana Robinson